So What Can I Do With Yeti? - Blue Yeti Owner's Manual

5. Select the output tab and select "Yeti Stereo Microphone."
6. From this screen, you will want to set the "Output Volume" to 100%. Once you've selected the Yeti as your
output device, you can control the headphone volume with the knob on the front of the Yeti.
Now that your Yeti is connected, verify that the microphone gain knob is centered, select your desired recording pattern,
and get ready to record.
For installation instructions for other operating systems, visit www.bluemic.com/yeti

So What Can I Do with Yeti?

In short, anything! Remember that there are no rules in recording — only guidelines. If it sounds good, then it is good!
On the following pages we've provided suggested uses and a description for each of the recording modes (patterns)
available and how you can use them to get great results, every time. If this all seems a bit much, just remember you
can always try a recording while switching through each of the recording modes to dial in your favorite sound.
11