Inserting The Date And Time - Canon PowerShot SX40 HS Getting Started

Inserting the Date and Time

You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 20).
You can insert and print the shooting date in images which do not have an
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.
• Use the DPOF print settings (p. 152) to print.
• Use the included software to print.
Refer to the Software Guide for details.
• Print using printer functions (p. 146).
52
Display the menu.
Press the n button.
Choose [Date Stamp].
Move the zoom lever to choose the 4 tab.
Press the op buttons or turn the 5 dial
to choose [Date Stamp].
Choose the setting.
Press the qr buttons to choose [Date] or
[Date & Time].
Press the n button to complete the
setting and restore the shooting screen.
Once set, [DATE] will appear on the
screen.
Shoot.
The shooting date or time will be recorded
in the image's lower right corner.
To restore the original setting, choose [Off]
in Step 3.