Checking The Focus - Canon PowerShot SX40 HS Getting Started

Jump by

Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame
to check the focus.
and Images
In single image playback, press the d
button, then press the op buttons to
choose a jump method.
If you press the qr buttons, the display
will advance to the image that is the
chosen number of images away.
Press the n button to restore single
image playback.
Press the l button to switch to
the focus check display (p. 40).
A white frame will appear where the AF
frame was when the focus was set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward k once.
The screen shown on the left will appear.
Press the m button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
Use the zoom lever to change the display
size, and the opqr buttons to change the
display position while checking the focus.
Press the n button to reset the
display to Step 1.
Checking the Focus
123