Sharp CD-C449W Service Manual page 17

CD-C449W/K449W
(Continued)
Ordinary stereo sound
Listening area
(Listening range with good stereo fidelity)
Wide listening area
(Stereo music can be heard anywhere in the room.)
SURROUND
Effect from each mode
MODE
You will enjoy a sound image that pro-
MODE-1 duces an intimate sound field. (as in
a medium-size hall)
This setting gives you a maximum
MODE-2
sound field as music comes out be-
yond the speakers. (as in a large,
domed arena)
This setting is great for live recording
MODE-3
and vocal music.
You will hear more vocals in an inti-
MODE-4
mate sound field. (as at a live music
performance)
This setting greatly increases the
MODE-5
amount of vocals or centre sounds in
a recording. (as in a small club)
SRS
MODE
PASS
3D SURROUND
SRS ( ) 3D SURROUND
About SRS ( ) 3D surround:
SRS is a breakthrough technology that creates 3-dimensional
sound by processing sound signals based on the human auditory
system. It produces real depth and localization of the sound
image which cannot be accomplished by ordinary stereo.
SRS only requires two speakers.
SRS ( ) 3D surround effects:
Live performance atmosphere
(Simulates a live concert atmosphere)
The localization of various musical sources is quite clear.
(The positions of the musical instruments and singers are very
clear.)
Reproduction of depth
(Sounds from the front and back of an orchestra can be ident-
ified easily.)
Expansion of the sound field
(The sound image is spread out over a wide area.)
Selecting the 3D surround mode:
When the sound source is in stereo, you can select from any of
5 different 3D surround effect.
1
Select any desired audio source and begin playback.
2
To hear the 3D surround effect, press the SRS MODE button.
"SRS ( )" will appear.
When the SRS MODE button is pressed, the current mode setting
will be displayed. To change to a different mode, press the SRS
MODE button repeatedly.
"PASS" will not be displayed in remote control operation.
MODE-1 MODE-2 MODE-3
Notes:
The 3D SURROUND effect will not work on a monaural sound
source.
When the 3D surround mode is being used, the equalizer will
be set to FLAT.
To cancel the 3D surround effect:
(Main unit operation)
Press the SRS MODE button repeatedly to select "PASS".
(Remote control operation)
Press the PASS button.
– 16 –
MODE-4 MODE-5 PASS