JVC FS-S57 Instructions Manual page 24

Using the Timers
4
Press UP or DOWN to
select the timer mode and the
source to play, then press
CLOCK/TIMER.
• Each time you press
DOWN, the timer mode and the source
to play change as follows:
DAILY TIMER
CD
• "DAILY TIMER CD": plays the selected disc or your
program (Daily Timer).
• Load a disc or make the program.
= go to step 5 .
• "DAILY TIMER TUNER": tunes in to the last station
you have been listening to (Daily Timer).
= go to step 6 .
5
When selecting "DAILY TIMER CD" in step
4 , select the disc number to play or Program
Play.
1) Press UP or DOWN to select the
disc number or Program Play.
• Each time you press the button, the
indication on the display changes as
follows:
CD DISC 1
CD PROGRAM
• "CD DISC 1" – "CD DISC 5": plays the selected
disc.
• "CD PROGRAM": plays the program you have
made.
2) Press CLOCK/TIMER.
The unit enters the volume level setting mode.
21
(continued)
UP
DOWN
UP or
CLOCK/
TIMER
DAILY TIMER
TUNER
UP
DOWN
CD DISC 2 CD DISC 3
CD DISC 5 CD DISC 4
CLOCK/
TIMER
6
Press UP or DOWN to set
the volume level, then press
CLOCK/TIMER.
• You can select the volume level between
"VOLUME – –" and "VOLUME 0" to
"VOLUME 40."
If you select "VOLUME – –," the volume
level is set to the current volume.
The selected timer mode indicator (DAILY)
stops flashing.
The unit enters the clock setting mode.
7
Adjust the clock if needed.
• See "Setting the Clock" on page 9.
8
Press STANDBY/ON
the unit if the unit is on.
When the timer turns on the unit, the
indicator and the selected timer mode indicator (DAILY) start
flashing.
To deactivate the timer temporarily, press
and hold CLOCK/TIMER until the
indicator and the selected timer mode indicator
(DAILY) go off.
To activate and change the timer, repeat steps 1 to 7 on
pages 20 and 21.
• If you want to change the Daily Timer setting, deactivate
the timer first.
• To activate the timer again without changing the setting,
press CLOCK/TIMER repeatedly until the
indicator and the selected timer mode indicator (DAILY)
light up on the display.
If the unit is already turned on when the timer-on time
comes
The timer does not work.
When you unplug the AC power cord or if a power
failure occurs
The timer will be canceled. You need to set the clock first, then set
the timer again.
When you have selected "CD PROGRAM" in step 5
Do not press DISPLAY while the unit is in standby mode to turn off
the clock indication ("DISPLAY OFF"); otherwise, the program
contents is cleared and playback starts in the Continuous Play mode
when the timer-on time comes.
UP
DOWN
CLOCK/
TIMER
STANDBY/ON
to turn off
(timer)
CLOCK/
TIMER
(timer)
(timer)