Maintenance And Storage - EarthWise SN70010 Operator's Manual

Auger (Fig. 9)
CAUTION Check fasteners before each use. A
loose auger can result is excessive vibration and
damage the snow thrower.
To replace the auger:

Remove cover (39), pulley frame (38) and belt (35).

Loosen the nut from the other side of the auger (42)
and dismount the pulley (37) and auger axle (41).

Replace the auger with a new one.

Ensure all screws and nuts are properly tightened.

MAINTENANCE AND STORAGE

Scraper blade (Fig. 10)
The scraper blade is a wear item and should be replaced
when necessary. A worn scraper blade can cause
extreme vibration and damage the auger.
To replace the scraper blade:




12
Undo the three (3) screws.
Replace the scraper blade with a new one.
Secure with the three (3) screws.
Ensure the screws are properly tightened.