EarthWise SN71018 Operator's Manual
  1. Manuals
  2. Brands
  3. EarthWise Manuals
  4. Snow Blower
  5. SN71018
  6. Operator's manual

EarthWise SN71018 Operator's Manual

18” snow thrower
Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATOR'S MANUAL
18" Snow Thrower
This product is covered by U. S. patents and other international patents
Copyright All Rights Reserved.
Model SN71018
This product has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual
before using this product.
Thank you for your purchase.
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PARTS, SERVICE QUESTIONS?
CALL 1-800-313-5111 BETWEEN 7:30AM-4:30PM EST FOR ASSISTANCE.
SAVE THIS MANUAL FOR FUTURE REFERENCE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN71018 and is the answer not in the manual?

Questions and answers

Related Manuals for EarthWise SN71018

Summary of Contents for EarthWise SN71018

  • Page 1 This product is covered by U. S. patents and other international patents Copyright All Rights Reserved. Model SN71018 This product has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

  • Page 2: Table Of Contents

    Warranty ........16 PRODUCT SPECIFICATIONS Model: SN71018 Power supply voltage:...

  • Page 3: Symbols

    SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Precautions that involve your safety. CAUTION! Read the instruction manual and follow the warning and safety instructions! CAUTION! Remove plug from outlet immediately if the cable is damaged or cut.

  • Page 4: Safety Warnings

    IMPORTANT SAFETY WARNINGS TO REDUCE RISK OF INJURY: Before any use Save these instructions and review frequently prior be sure everyone using this product reads and to use and in instructing others. understands all safety instructions and other WARNING: When using electric appliances, basic information contained in this manual.
  • Page 5 GENERAL SAFETY GROUND FAULT CIRCUIT INTERRUPTER (GFCI) Operation of the snow thrower in the hand-held protection should be provided on the circuit or outlet position is unsafe except in accordance with the to be used for the snow thrower. Receptacles are special instructions for such use provided in the available having built-in GFCI protection and may operator’s manual.

  • Page 6: Assembly

    ASSEMBLY UNPACKING 2. Align the holes in the lower handle section with those in the handle brackets. (Fig. 3) This product requires assembly. Carefully remove everything from the box. Make sure that Fig. 3 all items listed in the packing list are included. Inspect all items carefully to make sure no breakage or damage occurred during shipping.
  • Page 7 ASSEMBLY 4. Open the tabs on the handle connectors and adjust 5. Remove the spring pin from the crank rod. (Fig. 8) the top handle to the desired position. Lock in position by closing the tabs. (Fig. 6 & Fig. 7) Fig.
  • Page 8 ASSEMBLY 7. Secure the crank rod in place with the spring pin. 9. Position the chute deflector over the discharge chute (Fig. 11 & Fig. 12) and align the holes placing the washer between the deflector and the chute. (Fig. 14 & Fig. 15) Fig.
  • Page 9 ASSEMBLY 10. Secure with the bolts and wingnuts. Make sure the 11. Turn the crank knob clockwise to secure the snow wingnuts are tightened. (Fig. 16 & Fig. 17) deflector chute in position. (Fig. 18) Fig. 16 Fig. 18 Fig. 17...

  • Page 10: Operating

    OPERATING If working on pebbles, gravel or unpaved surfaces - To For the most efficient snow removal throw the snow avoid throwing loose surface material along with the downwind and slightly overlap each swath. snow, push down on the handle to raise the scraper at the base of the unit above the pebbles or gravel.
  • Page 11 OPERATING For large areas a definite pattern of operation is required to thoroughly clean an area of snow. These patterns will avoid throwing snow in unwanted places as well as eliminating a second removal of snow. Pattern A: Throw the snow to the right or left side where it is possible.

  • Page 12: Maintenance

    MAINTENANCE Before carrying out maintenance operations, disconnect power supply. Regular cleaning and maintenance of your snow thrower Replacing the scraper will ensure efficiency and prolong the life of the product. The scraper is located at the base of the snow thrower Check all fasteners at frequent intervals for proper beneath the rotor housing.
  • Page 13 MAINTENANCE 1. Open the left side plate by removing three (3) 3. Put the belt on the drive pulley first and then place screws. (Fig. 19) the belt at the lower end of the auger pulley. (Fig. 22) Screws Fig. 22 Fig.
  • Page 14 MAINTENANCE 6. Keep pressure on the belt with your right hand (rib Fig. 27 side down and flat side up) while rotating the auger. The belt will be gradually pushed down onto the pulley. When the belt is seated on the pulley, adjust it so that the ribs of the belt match the grooves on the pulley.

  • Page 15: Storage

    SERIAL NUMBER CALL US FIRST !! Call us first with questions about operating or maintaining this product at 1.800.313.5111 between 7:30 a.m. – 4:30 p.m. Eastern Standard Time, or send emails to earthwise@reelin.com. The Great States Corporation American Lawn Mower Company...

  • Page 16: Warranty

    OPERATOR’S MANUAL 18” Snow Thrower This product is covered by U. S. patents and other international patents Copyright All Rights Reserved. WARRANTY This product is manufactured for The Great States Corporation/American Lawn Mower Company. The Great States Corporation/American Lawn Mower Company, Shelbyville, Indiana, has been making lawn mowers for over 100 years and it warrants to the original owner that each new product and service part is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective product or part from the original date of purchase for two (2) years except...
  • Page 17 Este producto está amparado por patentes de EE. UU. y otras patentes internacionales Copyright. Todos los derechos reservados. Modelo SN71018 Este producto fue diseñado y fabricado de acuerdo con nuestros altos estándares de confiabilidad, facilidad de operación y seguridad para el operario. Si se trata con cuidado, esta herramienta le otorgará años de óptimo rendimiento y resistencia.

Table of Contents

Save PDF