Powering On The Server; Power On Button - HP ProLiant ML350 G5 Installation Manual

Powering on the server

Power on the server after connecting the cables.
1.
Power on server by pushing the power button (1). The power LED
(2) illuminates green.
1
2
Figure 6 Power on button
2. When the server powers on, an installation progress screen is
displayed. The installation process takes approximately 10 to 15
minutes to complete and the server will reboot twice. No user
interaction is required.
CAUTION:
Do not interrupt the installation process; when the
installation sequence is complete, the system prompt
appears.
3.
By now you should have determined the access method for your
storage server. For more information, see
access
26
Installing the server
method" on page 14.
gl0082
"Deciding upon a network