HP ProLiant ML350 G5 Installation Manual page 38

Configuration Worksheet
Contact person
System location
Community name
No. 1
Trap destination
No. 1
Community name
No. 2
Trap destination
No. 2
Network Interfaces (to be completed for non-DHCP configurations)
Local area
connection 1
IP address
Subnet mask
Default gateway
Local area
connection 2
IP address
Subnet mask
Default gateway
iLO 2 settings
38
Configuring the server on the network
System administrator for the storage server. The
contact and location will be provided to any
SNMP management computer that requests them.
Any text string, such as a location or phone
number. For example, Floor #3, Financial
Services Bldg.
The community name is used for network
authentication when sending outgoing SNMP
messages.
The IP address of a management computer that
will receive SNMP messages from the storage
server using the above community name.
Same as above.
Same as above.
A local area connection is automatically created
for each network adapter that is detected.
An Internet Protocol (IP) address is assigned to the
server. If it is not automatically assigned, enter the
IP address that you want to assign to this server.
A mask is used to determine what subnet an IP
address belongs to.
The gateway in a network that the network
adapter will use to access all other networks.
Any additional local area connections can be
renamed to prevent confusion.
Same as above.
Same as above.
Same as above.
Change the host name, IP settings, and
administrator settings.