Download Print this page

Safety Information; Electronic Devices; Aircraft; Medical Instruments - innoXplore iX?B24 A2DP Manual Manual

A2dp stereo bluetooth audio adapter dongle 3.5mm audio jack

Advertisement

Congratulations on purchasing iX‐B24 Bluetooth Audio Adapter. Be sure o read the safety
information before using the dongle.

1 Safety Information

1.1 Electronic Devices

To avoid electromagnetic interference (EMI) turn off the dongle in any place where posted instruct
you to do so. Note: Most modern electrical devices are susceptible to electromagnetic interference if
inadequately shielded, designed or otherwise configured for electromagnetic compatibility.

1.2 Aircraft

Turn off the Audio dongle when on board of aircraft. The use of Bluetooth enabled devices could
interfere with the telecommunication system of aircraft.

1.3 Medical Instruments

If you use a medical device, such as pacemaker, consult the manufacturer of your medical device to
determine if it is adequately shielded from electromagnetic interference. Your Physician might assist
you in obtaining this information.

1.4 Power Adapter

Only use the supplied power adapter with this dongle.

2 Package Contents

Please check the following items are included in your package:
‐ Device with 3.5mm Plug
‐ User Manual
‐ USB Cable
‐ AC Adapter EU Type

3 Features

On device characteristics
‐ Power / Pairing Button (PAP)
‐ Indicator Light
‐ Charging Port

4 Charging

Note: Charge at least 2.5 hours before first time usage
iX‐B24 has an in built battery which must be fully charged before you use the dongle. Charging takes
about 2 hours. You can charge the dongle through the AC adapter or the USB connector on a
connector

4.1 Charging with a computer

1. Connect the smaller connector on the USB cable to the charging port on the dongle.
2. Connect the other end of the USB cable to USB connector on the connector. The LED lights red.
3. Unplug the cable when the red LED turns off

4.2 Charging with the AC Adapter

1. Connect the small connector on the USB cable to the USB charging port on the dongle
2. Connect the other end of the USB cable to the USB connector on the AC dongle.
3. Plug the AC Adapter into an electrical outlet, the LED lights red.
4. Unplug the cable when the red light turns off.

Advertisement

loading

This manual is also suitable for:

Ix-b24