Advertisement
Quick Links
3.5 mm Audio Jack
Manual innoXplore iX‐B22 A2DP Stereo Bluetooth Audio Adapter Dongle Receiver 3.5mm (Female)
Audio Jack [iX‐B22]
Use
This product can be used with a USB Bluetooth adapter, Bluetooth enabled mobile phone (must
support stereo), and audio transmitters, supporting Bluetooth 2.1 + EDR, A2DP. Output interface can
connect to the headphone cable, or speakers, so as to achieve the wireless transmission. The
distance is up to 10M. In the below manual MFB means Multi Function button.
Charge
iX‐B22 built in rechargeable battery. For the first time use, we recommend charging the completely.
The red LED light goes on when charging.
Advertisement
Related Manuals for innoXplore iX?B22
Summary of Contents for innoXplore iX?B22
- Page 1 3.5 mm Audio Jack Manual innoXplore iX‐B22 A2DP Stereo Bluetooth Audio Adapter Dongle Receiver 3.5mm (Female) Audio Jack [iX‐B22] This product can be used with a USB Bluetooth adapter, Bluetooth enabled mobile phone (must support stereo), and audio transmitters, supporting Bluetooth 2.1 + EDR, A2DP. Output interface can connect to the headphone cable, or speakers, so as to achieve the wireless transmission.
- Page 2 Charging time: The first time to charge the battery completely. It normally takes 2 hours. When fully charged, the red LED light goes out. Hold the multifunction button for 4 seconds to open the headset. See the next sections "Startup and Shutdown" iX‐B22. Working on Standby time Completely fully charged battery, when connected to headphones the working time is 3 hours.
- Page 3 Notice: When this unit is in pairing status, if you cannot finish the connection within 3 minutes, the pairing status will turn into standby status ( blue LED light flashes). If you do not establish any operational connection within 10 minutes, this unit will automatically switch off. So if you would like to use this unit again, please switch it on again.