Using The Tuner - JVC FS-5000 Instructions Manual

Using the Tuner

REMOTE CONTROL RM-RXFS5000
DIMMER SLEEP POWER
DISPLAY FM MODE AUX
AHB. AUTO
SUPER PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
SET
UP
<
SET
DOWN
MD TUNER CD
BAND
/TAPE
4
VOLUME
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Before listening to the radio:
• Check that both the FM and AM antennas are correctly con-
nected. (See page 3).
One Touch Radio
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
Tuning In a Station
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM.
AM
2. Select a station using one of the following
methods.
Manual Tuning
4 ¢
Press the or button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
Auto Tuning
4
If you press and hold the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Press the UP or DOWN button on the Remote Control to select
FM MODE
AUTO PRESET
UP
Band display, Frequency display,
>
Preset channel
DOWN
TUNER BAND
¢
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
—————————
TUNER
FM
BAND
OR
¢
or button on the Unit or the
OR
AHB. PRESET
SUPER PRO TUNING
POWER
FM mode indicators
the desired preset number. After 1 second the display will show
the preset number's band and frequency.
Example:Press the UP button until the preset number 12 "P--
12" appears.
UP DOWN
or
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET TUNING button to select the desired preset
number. Its band and frequency are displayed.
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM stations using
the Remote Control.
Note: Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting
TUNER
BAND
When changing the
Band
1. Select a band by pressing the TUNER
BAND button.
2. Press the 4 or ¢ button to tune in a sta-
tion.
3. Press the SET button.
"P------" is displayed. The lower 2 digits blink.
PRESET TUNING
4
SLEEP
DOWN MULTI CONTROL UP CLOCK
¢
OPEN/CLOSE
TUNER
CD
AUX MD/TAPE
BAND
TUNER BAND
TIMER/SNOOZE
(After 1 second)
—————————
or
SET DOWN SET
UP
FM = 30, AM = 15
8