Table of Contents
Advertisement
1. Windows will automatically find the IBM High Rate Wireless LAN (PCI)
after the card has been physically installed.
2. Insert the IBM Driver & Utility CD into the CD-ROM drive.
3. Select Automatic search for a better driver.
4. Click Next.
5. Enter any specific wireless network information in the utility page to set up
your wireless card.
6. Click OK.
Note: These settings can be changed at a later time, as described on page
1-31 through 1-35.
1-10
IBM High Rate Wireless LAN (PCI) Card: Quick Installation Guide
Advertisement
Table of Contents
