Using The Timers; Recording Timer; Sleep Timer - JVC CA-UXQ3S Instructions Manual

Using the Timers

Convenient Functions

Sleep Timer

When the specified time passes, the main unit
automatically turns off.
Press .
• Each time you press
(in minutes) toggles as follows.
Cancel (Sleep
indicator disappears.)
Example: To set the sleep timer to 60 minutes
Sleep indicator
NOTE
• When you set the sleep timer, the display window
automatically dims.
• Before the clock has been set (While "0:00" is
flashing), when you press
ADJUST!" appears.
Changing the sleep timer setting
• Press repeatedly to select the time again.
23
Number buttons
, the time display
, "CLOCK
Set the clock beforehand. (
Confirming the sleep timer setting
(remaining time)
• With the sleep timer activated, press

Recording Timer

You can use the recording timer function to record
FM/AM broadcasts or sound from other equipment
to a cassette tape.
You can enter up to three timer settings in total for
the recording timer and the playback timer
( page 25).
NOTE
• Timer settings remain unchanged until the timer is
replaced by new setting.
1
Prepare the sound source.
Radio Preset the radio station whose
broadcast you want to record. (
page 15)
Other Follow the operation manual for the
equipment equipment.
2
Insert a cassette tape. (
19)
3
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER1" is selected
Timer number
4
Press .
5
Set the starting time and ending
time.
Example:To set the recording time from 6:30
a.m. to 6:45 a.m.
• For setting the clock, refer to "Setting the
Clock" ( page 10).
Entering the hour →
minute →
page 10)
once.
page
→ Entering the