JVC CA-UXQ3S Instructions Manual page 27

6
Press or
"ONCE" or "EVERYDAY".
ONCE : The recording timer works once.
EVERYDAY: The recording timer works every
day.
7
Press .
8
Press or
TIMER".
• "REC" stands for "Recording".
9
Press .
10
Press or
sound source.
Example: To record an FM broadcast to a
cassette tape
• When you want to record sound from other
equipment, you cannot use the recording
timer function to start playback on any
equipment other than this product.
■When you want to record an FM/AM radio
broadcast
• Press , and then press
the number buttons to select the preset
number of the radio station whose broad-
cast you want to record. Refer to "Using
the number buttons" (
11
Press .
• The settings appear in the display window.
Confirm the settings.
12
When the main unit is on, press
to turn off the main unit.
• While the recording timer is functioning, the
volume is set to "0" and no sound is pro-
duced from the speakers or headphones.
• The recording timer is available only when
the main unit is turned off.
to select
to select "REC
to select a
, or
page 10).
NOTE
• During operation, you can return to the previous
step by pressing . You can quit the recording
timer settings by pressing
not stored.
Canceling the recording timer
In step 3 on page 23, select the timer number you
want to cancel, and then press
Even when you cancel the recording timer, the set-
ting remains stored.
Activating the recording timer again
In step 3 on page 23, select the timer number you
want to activate, and then press
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is cut, the recording timer settings may be
lost. If the settings are lost, set the clock and
recording timer again.
. The settings are
.
repeatedly
24