Handling Cds/Cassette Tapes; Cleaning Cds - JVC CA-UXQ3S Instructions Manual

Micro component system consists of ca-uxq3s and sp-uxq1s
Table of Contents

Advertisement

Handling CDs/Cassette Tapes

Reference
Handling CDs
• Do not put adhesive tape or stickers, or write on
a CD.
• Do not bend a CD.
• Be sure not to use heart/flower shaped CDs or
other irregularly shaped CDs. The use of such
CDs damages the main unit.

Cleaning CDs

Signal surface
Wipe a CD from the
center outward with a
soft cloth.
• Be sure not to use thinners, benzenes, cleaners
for analog records, or other chemical agents.
Handling cassette tapes
• A slack tape may become
caught in the inner part of
the main unit and damage
the main unit. Before
using a cassette tape,
wind up any slack in
the cassette tape as
shown on the right. Do
not pull out the tape or touch the
tape's surface.
Cleaning the tape deck head
Clean the head, pinch rollers and capstans
approximately every 10 hours of playback time
before the volume falls or sound quality deterio-
rates
Capstans
Pinch roller
Head
27
Scratches concentrated
on a certain part cause
sound dropout.
Cotton-tipped
swab moistened
with alcohol
Pinch roller
Cleaning the main unit cabinet
• Gently dust the cabinet surface with a soft dry
cloth. When the cabinet is very dirty, dampen the
cloth with a neutral detergent diluted with water,
wring out the cloth well, and then wipe the cabi-
net with the dampened cloth followed by a soft
dry cloth.
• Do not wipe the cabinet with thinners or ben-
zenes. Wiping it with these agents may cause
discoloration of the cabinet or removal of the
paint. Do not spray insecticides or other highly
volatile agents onto the cabinet. Do not leave
pieces of rubber or plastic on the cabinet for a
long period.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1218-005aUx-q3sUx-q3sacUx-q3satUx-q3sseSp-uxq1s

Table of Contents