KTM 250 EXC RACING Owner's Manual page 98

3-4E
– Remove the bolts and take off the sprocket cover.
1
– Remove the 2 bolts of the clutch slave cylinder and pull the
2
clutch slave cylinder off the casing.
1
– Swing the chain damper plate backwards.
1
– Open the chain joint and remove the chain from the vehicle.
2
– Remove the bolt and take off the cable clip.
3
NOTE: From Model 2001 onwards a cable tie is mounted instead of the
the cable clip.
3
– Disconnect the radiator hose and dismount the tank roller .
4 5
5
4
– Dismount the front engine mounting bolt .
6
6
– Remove the engine mounting bolt and the hex nut .
7 8
– Dismount the swing arm pivot and pull the swing arm backwards.
– Lift the engine out of the frame.
8
7