Toyota 2003 HIGHLANDER User Manual page 81

3. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 66 in this section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
'03 HIGHLANDER_U (L/O 0208)
4. Replace the head restraint.
Be sure to close the cover when the an-
chor bracket is not in use.
2003 HIGHLANDER from Aug. '02 Prod. (OM48441U)
—Installation with child
restraint lower anchorages
The lower anchorages for the child re-
straint system interfaced with
FMVSS225 specification are installed in
the rear seat.
The anchorages are installed in the clear-
ance between the seat cushion and seat-
back of both outside rear seats.
Child restraint system interfaced with the
FMVSS225 specification can be fixed with
these anchorages. In this case, it is not
necessary to fix the child restraint system
with a seat belt on the vehicle.
the
81