Toyota 2003 HIGHLANDER User Manual page 271

2003 highlander
Hide thumbs Also See for 2003 HIGHLANDER:
Table of Contents

Advertisement

D
Four–wheel drive models:
Do not use snow tires of different
brands, sizes, construction or tread
patterns, as this may cause danger-
ous handling characteristics result-
ing in loss of control.
SNOW TIRE INSTALLATION
Snow tires should be installed on all
wheels.
Installing snow tires on the front wheels
only can lead to an excessive difference
in road grip capability between the front
and rear tires, which could cause loss of
vehicle control.
When storing removed tires, you should
store them in a cool dry place.
Mark the direction of rotation and be sure
to install them in the same direction when
replacing.
CAUTION
D
Do not drive with the snow tires
incorrectly inflated.
D
Never drive over 120 km/h (75 mph)
with any type of snow tires.
'03 HIGHLANDER_U (L/O 0208)
Side chain
Cross chain
TIRE CHAIN SELECTION
Use the tire chains of correct size.
Use the following type chains.
mm (in.)
A Diameter of side chain
B Width of side chain
10 (0.39)
C Length of side chain
30 (1.18)
D Diameter of cross chain
E Width of cross chain
14 (0.55)
F Length of cross chain
25 (0.98)
Regulations regarding the use of tire
chains vary according to location or
type of road, so always check them
before installing chains.
2003 HIGHLANDER from Aug. '02 Prod. (OM48441U)
NOTICE
If the wrong combination of tire and
chain is used, the chains could dam-
age the vehicle body.
CHAIN INSTALLATION
Install the chains on the front tires as
tightly as possible. Do not use tire
chains
on
the
rear
chains
after
driving
(1/4—1/2 mile).
When installing chains on your tires, care-
fully follow the instructions of the chain
manufacturer.
If wheel covers are used, they will be
scratched by the chain band, so remove
the covers before putting on the chains.
3 (0.12)
4 (0.16)
tires.
Retighten
0.5—1.0
km
271

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents