Toyota 2003 HIGHLANDER User Manual page 141

Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.
CD (Compact Disc)
Push "CD" to switch from radio or cas-
sette operation to compact disc operation.
If the audio system is off, you can turn
on the compact disc player by pushing
"CD". In both cases, a disc must already
be loaded in the player.
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played.
If the player or another unit equipped with
the player malfunctions, your audio system
will display one of the six following error
messages.
'03 HIGHLANDER_U (L/O 0208)
If "WAIT" appears on the display, it indi-
cates that the inside of the player unit
may be too hot due to the very high ambi-
ent temperature. Remove the disc or mag-
azine from the player and allow the player
to cool down.
If "Err 1" appears on the display, it
indicates the disc is dirty, damaged, or it
was inserted up–side down. Clean the
disc or insert it correctly.
If "Err 2" appears on the display, it
indicates no disc is loaded inside the
magazine. Insert a disc.
If "Err 3" or "Err 4" appears on the
display, it indicates there is a trouble in-
side the system. Eject the disc or maga-
zine. Set the disc or magazine again.
If "OPEn" appears on the display, it
indicates the compact disc changer lid is
open. Close the compact disc changer lid.
If the malfunction is not rectified, take
your vehicle to your Toyota dealer.
2003 HIGHLANDER from Aug. '02 Prod. (OM48441U)
CONTROL / MODE (Audio control and
mode adjustment)
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For low–pitch tone adjustment,
"CONTROL / MODE" repeatedly
"BAS" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from
"BAS –5" to "BAS 5".
For middle–pitch tone adjustment, push
"CONTROL / MODE" repeatedly until "MId"
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from "MId
–5" to "MId 5".
For high–pitch tone adjustment,
"CONTROL / MODE" repeatedly
"TRE" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from
"TRE –5" to "TRE 5".
push
until
push
until
141