Xtreme XC-14A User Manual page 4

XC User's Manual
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
Please read this manual carefully for instructions on correct installation and usage. Please read all safety instruc-
tions.
1. Transport and store the unit in an upright position only. Leave the unit in an upright position for at least 3
hours before use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded utility of the correct rating / capacity.
4. The unit will cool when the room temperature is between 64.4°F - 113°F (18°C - 45°C) depending on the
thermostat setting.
5. DO NOT use this unit for functions other than those described in this User's Manual.
6. DO NOT tilt the unit.
7. DO NOT cover or obstruct the unit's inlet and/or outlet grilles.
8. DO NOT use the unit in areas where it will be exposed to rain or water.
9. NEVER unplug the unit while it is operating.
WARNING! DO NOT use the unit in wet environments, such as a laundry room, to avoid risk of electrical shock.
10. DO NOT place any foreign objects on the unit.
11. DO NOT operate the unit with wet or damp hands.
12. DO NOT allow chemical substances to come in contact with the unit.
13. DO NOT operate the unit in the presence of flammable substances or vapors such as alcohols, pesticides,
gasoline, etc.
WARNING! DO NOT operate the unit in explosive or flammable environments.
14. DO NOT use the plug to start or to stop the unit. Always use the control panel to start and to stop the unit.
15. Always turn off the unit when it is not in use, and unplug the power plug from the electrical outlet.
16. Always turn the unit off and unplug the main power plug from the electrical outlet before cleaning, mov-
ing, or performing maintenance.
17. AVOID the use of adapter plugs or extension cords. If it is necessary to use an extension cord or an adapter
plug to operate the unit, ensure that they are correctly rated for the application. Consult local qualified
electrician and all local electrical codes to ensure proper setup. Any extension cord used with the device
must be rated for a minimum of 15A.
18. DO NOT unplug the unit by pulling on the electrical cord. Keep the electrical code away from heat sources
and always completely unroll the cord to avoid overheating. If the power cord becomes damaged, a quali-
fied service agent, qualified electrician, or similarly qualified person must replace it, in order to avoid a
hazard or shock.
WARNING! DO NOT operate a unit with a damaged power cord.
19. The filters must be used with the product at all times. When the filters are removed for cleaning, always
ensure that the unit has been turned off and unplugged from the electrical outlet.
20. Regularly clean the filters to maintain efficiency. If the filters are not cleaned regularly, the units output
performance and efficiency will decline and energy consumption will increase.
21. DO NOT operate the unit with a damaged power cord or plug, after it malfunctions, or if the unit has been
dropped or damaged.
22. Only use the unit in the upright position on a even, flat surface. Unit must be positioned at least 24 inches
(60 cm) from the nearest object in any direction.
23. Stop operation immediately if abnormal noise or odor is noticed. Contact local service center.
Xtreme Power Conversion Corporation
Portable Air Conditioning
Page 4