Dodge 2010 Caliber Owner's Manual page 212

NOTE: The factory default Zone is 8. During program-
ming, the Zone value will wrap around from Zone 15 to
Zone 1.
Manual Compass Calibration
If the compass appears erratic or inaccurate, and the
variance has been properly set, you may wish to manu-
ally recalibrate the compass. To manually calibrate the
compass:
1. Start the engine and leave the transmission in the
PARK position.
2. Using a quick button press (less than one second),
press and release the EVIC button several times until the
EVIC displays the "Personal Settings (Customer-
Programmable Features)" menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 211
3. Once in the "Personal
Programmable Features)" menu, press and release (less
than one second) the EVIC button several times until
"Calibrate Compass (Yes)" is displayed.
4. Using a long button press (more than one second)
press the EVIC button, this will place the Compass in
calibration mode. The CAL indicator will come on con-
tinuously in the EVIC display to indicate that the com-
pass is now in the calibration mode, and that the vehicle
can now be driven to calibrate.
5. To complete the compass calibration, drive the vehicle
in one or more complete 360–degree circle under 5 mph
(8 km/h) in an area free from power lines and large
metallic objects, until the "CAL" indicator turns off. The
compass will now function normally.
Settings (Customer-
4