Removing The Main Burner Base; Removing The Griddle Cover (36" Models With Built-In Griddle); Removing The Griddle Grease Tray; Removing The Backguard - Electrolux E30GF74GPS Technical & Service Manual

Removing the main burner base:

1. Lift the main based to clear the igniter and off.
Removing the griddle cover: (36" models
with built-in griddle)
1. Raise the front of the griddle cover, pull a cover
forword and off.

Removing the griddle grease tray:

1. Raise the front of the griddle cover, pull the tray
towards the front of the range and lift it out.

Removing the backguard:

1. Obtain access to the rear of the range, remove
the (4) screws, two at each end.
66