Connecting Other Equipment - JVC CA-MXJ150R Instructions Manual

Connecting Other Equipment

You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Audio equipment
Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, using an audio cord (not
supplied).
FM 75 COAXIAL
AM ANT
AUX I N
R L
SPEAKERS
IMPEDANCE 6-16 OHMS
+
L
–
–
R
+
To audio output
NOW, you can plug in the unit and other
connected equipment FINALLY!
To start the display demonstration
Press DEMO while the unit is turned off (on
standby).
To stop the display demonstration, press any button.
– 8 –
FM 75 COAXIAL
AM
ANT
AUX I N
R L
SPEAKERS
IMPEDANCE 6-16 OHMS.
+
L
–
–
R
+
AC CORD
To a wall outlet
COUNTER
RESET
DEMO