Setting The Auto Power-Off Time; Adjusting The Lcd Monitor Brightness - Canon EOS 600D Instruction Manual

3 Setting the Auto Power-off Time

To save battery power, the camera turns off automatically after the set
time of idle operation elapses. You can set this auto power-off time.
When the camera has turned off due to auto power off, you can wake it
up by pressing the shutter button halfway or pressing any of the
following buttons: <M>, <B>, <x>, <A> etc.
If [Off] has been set, either turn off the camera yourself or press
the <B> button to turn off the LCD monitor to save battery
power.
Even if [Off] has been set and the camera is not used for 30 min.,
the LCD monitor will turn off automatically. To turn on the LCD
monitor again, press the <B> button.

3 Adjusting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [5] tab, select [Auto power
off], then press <0>. Select the desired
setting, then press <0>.
Under the [6] tab, select [LCD
brightness], then press <0>. With the
adjustment screen displayed, press the
<U> key to adjust the brightness, then
press <0>.
When checking the exposure of an
image, set the LCD monitor brightness to
4 and prevent the ambient light from
affecting the reviewed image.
Handy Features
167