JVC CA-MD70 Instructions Manual page 41

Continued
Amplifier/tuner
DISPLAY/CHARA. DIRECT TITLE INPUT
(CONTRAST) (DISPLAY PATTERN)
TITLE ø CURSOR Ø
Continued
6
Input a character.
• EX. When entering "H"
1) Rotate MULTI JOG to select the row where a
character you want exists.
• In this example, select the row of "F G H I J."
Select the row
2) Press one of the DIRECT TITLE INPUT
buttons to select the character position in the
row.
The selected character is input, and the character
entry position moves to the next.
• In this example, press 3 which corresponds to
"H" in the row of "F G H I J."
MULTI
JOG
ENTER
MD recorder
MD IN lamp
SET
CANCEL
• To move the character entry position while entering a
title, press ø CURSOR Ø.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
7
Repeat steps 5 and 6 to input other characters.
• The main display can only show 7 characters at a
time. If you enter the 8th character, the first character
disappears, and so on.
8
Press ENTER twice to finish title entry.
• If you want to cancel the editing, press TITLE after
pressing ENTER once in this step.
9
Press 0 to eject the MD.
"WRITING" appears while the editing you have made
is being recorded on the MD.
• During play: Entering a track title
• During recording: Entering a track title
– 35 –
MD Loading slot
You can assign titles during play or recording
The MD recorder repeats playback of the current
track until you press ENTER twice in step 8
above. When you press it twice, MD stops play.
Entering a disc title
The MD recorder repeats playback of all tracks
of the MD until you press ENTER twice in step 8
above. When you press it twice, MD stops play.
The MD recorder continues recording even after
you press ENTER twice in step 8 above. When
you press it twice, a track title is assigned to the
track where you have started the title entry.
0