Playing Back All The Entire Discs-Continuous Play - JVC CA-FSS57 Instructions Manual

Playing Back All the Entire Discs
—Continuous Play
You can play discs continuously.
1
Load discs into the 5-CD Changer.
2
Select a disc and start playback.
On the remote control:
Press one of the disc number
buttons (CD 1 – CD 5).
On the unit:
1) Press DISC SELECT repeatedly
to select the disc you want.
2) Press #/8 CD.
Playback starts from the first track of the
selected disc.
Ex. When an audio CD is played back.
Current track number
1 2 3 4 5
CD
Elapsed playing time
Ex. When an MP3 disc is played back.
Current group number
1 2 3 4 5
CD
ID3 Tag information and group/file name
• Without selecting the disc number, pressing 3/8 CD
starts playing back from the currently selected disc.
CD 1
CD 2
CD 3
CD 4
CD 5
DISC
SELECT
CD
DISC
SELECT
CD
Current track number
To stop play for a moment, press 3/8 CD.
While pausing, the elapsed playing time flashes
on the display.
To resume play, press 3/8 CD again.
To stop during play, press 7.
To remove discs, press the corresponding disc eject buttons
(CD10 – CD50) on the unit.
To start Continuous Play while a source other than
"CD" is selected
On the unit ONLY:
Press DISC SELECT repeatedly to select a disc,
then press #/8 CD.
• Each time you press DISC SELECT before
#/8 CD, the disc tray number changes.
Disc tray number
Disc playback sequence in the 5-CD Changer
When 5 discs are loaded on the disc trays*, they are played in the
following sequence:
Ex.: When playback is started from the CD 2 tray:
CD 2 ] CD 3 ] CD 4 ] CD 5 ] CD 1 (then stops)
* If no disc is on the disc tray, 5-CD Changer skips that tray.
While playing back an MP3 disc
ID3 Tag information (the name of the title, artist, and album) and
group/file name will be shown on the display. When the name is too
long to be displayed at once, it is scrolled.
Continued
3/8
CD
DISC
SELECT
CD
DISC
SELECT
CD
16