CS-E15DTEW CU-E15DBE / CS-E18DTEW CU-E18DBE / CS-E21DTES CU-E21DBE
12.5.2. Fan Motor Removal Procedure
1. Remove two Air Guider Blower Wheel (Fig. 4).
2. Remove Fan Motor by:
- Release the connectors Fan Motor (Fig. 5).
- Remove the Fan Motor supportor screws (Fig. 5).
- Remove the Blower Wheel bolts (Fig. 5).
12.5.3. Electronic Controller Removal Procedure
1. Remove the Control Board Cover by removing the screws
(Fig. 6).
2. Electronic Controller (Fig. 7).
70
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)