JVC CA-DXJ21 Instructions Manual page 81

6 Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
To cancel A-B Repeat, repeat steps 1 to 3, and select "OFF"
in step 4.
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
1 While playing a disc (without PBC for SVCD/VCD),
display the on-screen bar with the pull-down menu.
• All discs except DVD: Time Search can be used before
starting playback.
2 Select .
3 Display the pop-up window.
Dolby D
DISC 1 TITLE
DVD-VIDEO
3/2.1ch
TIME OFF CHAP.
TIME OFF
TIME _ : _ _ : _ _
4 Enter the time.
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1 (hours):
02 (minutes): 00 (seconds), press
1, 0, 2, 0, then 0.
To move to a point of 54
(minutes): 00 (seconds), press 0,
5, 4, 0, then 0.
• It is always required to enter the hour digit (even "0"
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a misentry, press
5 Finish the setting.
The System starts playing from the
specified time.
23 TOTAL 1:01:58 1:25:58
TITLE 2 14 CHAP CHAP 3 TOTAL
1/3 1/3 1/3
1/3 1/ 3 1/1
to erase the last entry.
Chapter/Track Search
You can search for the number of the item to play.
For DVD Video/DVD-VR: Chapter
For DVD Audio: Track
1 While playing a disc, display the on-screen bar with
the pull-down menu.
2 Select or
CHAP. TRACK
3 Display the pop-up window.
Dolby D
DISC 1 TITLE
DVD-VIDEO
3/2.1ch
TIME TIME OFF CHAP.
CHAPTER
4 Enter the desired chapter/track number.
Examples:
To select 5, press 5.
To select 15, press 1, then 5.
To select 30, press 3, then 0.
• To correct a misentry, press the number buttons until
the desired number is shown in the pop-up window.
5 Finish the setting.
The System starts playing the
searched chapter or track.
.
23 TOTAL 1:01:58 1:25:58
TITLE 2 14 CHAP CHAP 3 TOTAL
1/3 1/3 1/3
1/3 1/ 3 1/1
_
26