Changing The Display Brightness; Setting The Clock - JVC CA-DXJ21 Instructions Manual

To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 on page 15.
2
Select a parameter you want to adjust.
GAMMA
Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or dark
as a whole (–8 to +8).
CONTRAST Adjust if the far and near position is
unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
To erase the VFP screen, press VFP again.

Changing the Display Brightness

(while holding...)
DIMMER 1 Dims the display.
DIMMER 2
Dims the display more than DIMMER 1.
Remote
ONLY
DIMMER 1 DIMMER 2
DIMMER OFF
(Canceled)

Setting the Clock

Without setting the built-in clock, you cannot use any timers
except the Sleep timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL
while holding SHIFT. You can return to the previous step.
1
Activate clock setting mode.
(while holding...)
• If you have already adjusted the clock before, press the
button repeatedly until the clock time starts flashing.
2
Adjust the hour, then minute.
Now the built-in clock starts working.
To display the clock during playback
For "DVD/CD" and "USB MEMORY":
(while holding...)
For "TAPE," "TUNER FM," "TUNER AM" and "AUX":
(while holding...)
Remote
INFO
ONLY
Disc/file type
Clock
Playback
information
Current source
information
Clock
16