JVC CA-DXJ21 Instructions Manual page 93

AUDIO menu
Item
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION
OTHERS menu
Item
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with built-in
Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in
DTS/MPEG Audio decoder.
This setting is effective for digital audio output if "DIGITAL AUDIO OUTPUT" is set to "PCM
ONLY."
DOLBY SURROUND: Select this when connecting a surround decoder.
STEREO: Select this when connecting a stereo receiver, MD player, TV, etc.
You can enjoy a powerful sound at a low volume level while playing Dolby Digital software.
AUTO: Select to apply the compression only to multi-channel encoded audio (except for 1-channel
and 2-channel sources.)
ON: Select this to always apply the compression.
You can select Resume.
ON: The System resumes playback from the position where playback has been stopped (not applicable
for CD).
OFF: Resume is deactivated.
Activate or deactivate the on-screen guide.
ON: Activate the on-screen guide.
OFF: Deactivate the on-screen guide.
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the System's
Registration Code is overwritten for copyright protection.
Contents
Contents
38