Garmin GPS 400W Installation Manual page 87

5 . 3 . 1 4 V O R / L O C / G S A R I N C 4 2 9 C O N F I G P a g e ( G N S 4 3 0 W O n l y )
S e l e c t t h e V O R / L O C / G S A R I N C 4 2 9 C O N F I G P a g e ( s e e
F i g u r e 5 - 1 8 ) . T h i s p a g e c o n f i g u r e s t h e V O R / I L S A R I N C
4 2 9 o u t p u t a n d i n p u t p o r t s .
S P E E D
S e l e c t i o n
L o w
H i g h
S D I
S e l e c t i o n
C o m m o n
V O R / I L S 1
V O R / I L S 2
D M E M O D E
S e l e c t i o n
D i r e c t e d f r e q 1
D i r e c t e d f r e q 2
4 0 0 W S e r i e s I n s t a l l a t i o n M a n u a l
1 9 0 - 0 0 3 5 6 - 0 2
D e s c r i p t i o n
Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High-speed ARINC 429 (nominally 100 kilobits per second)
D e s c r i p t i o n
RX: Accepts all 429 inputs
TX: Generates all 429 outputs with SDI = 0.
Number 1 (Pilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 1.
TX: Generates all 429 outputs with SDI = 1.
Number 2 (Copilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 2.
TX: Generates all 429 outputs with SDI = 2.
D e s c r i p t i o n
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 1 of that DME is tuned. "Directed freq 1" should be selected if a
single-channel ARINC 429 DME is tuned.
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 2 of that DME is tuned.
F i g u r e 5 - 1 8 . V O R / L O C / G S A R I N C
4 2 9 C O N F I G P a g e
P a g e 5 - 1 7
R e v . A