Garmin GPS 400W Installation Manual page 83

C D I ( G N S 4 3 0 W O n l y )
S e l e c t i o n
G P S
V L O C
I f i t i s d e s i r e d t o d i s a b l e t h e G N S 4 3 0 W C D I k e y , p r e s s M E N U o n t h e M A I N C D I / O B S
C O N F I G p a g e a n d s e l e c t " I g n o r e C D I K e y ? " . T h i s c a u s e s t h e f i e l d a b o v e t h e C D I k e y t o
a l w a y s d i s p l a y G P S , r e g a r d l e s s o f C D I k e y p r e s s e s . T h i s m a y b e n e c e s s a r y f o r c e r t a i n
E F I S s y s t e m s w h e r e n a v i g a t i o n s e n s o r s e l e c t i o n m u s t b e a c c o m p l i s h e d o n t h e E F I S o r i t s
c o n t r o l p a n e l .
O B I S O U R C E ( G N S 4 3 0 W O n l y )
S e l e c t i o n
A l w a y s G P S
T r a c k C D I
4 0 0 W S e r i e s I n s t a l l a t i o n M a n u a l
1 9 0 - 0 0 3 5 6 - 0 2
D e s c r i p t i o n
The GNS 430W CDI button is in the GPS state, and the GPS
ANNUNCIATE output is active. This annunciator output may be
required to be active for some installations.
The GNS 430W CDI button is in the VLOC state, and the VLOC
ANNUNCIATE output is active.
D e s c r i p t i o n
The MAIN King Serial OBI outputs are always GPS. This is useful if it is
desired to switch a Bendix/King KI 229 or KNI 582 RMI pointer
independently from the GNS 430W CDI button.
The MAIN King Serial OBI outputs are GPS or VOR, and switchable by
the GNS 430W CDI button. This is useful if it is desired the Bendix/King
KI 229 or KNI 582 RMI pointer to display the same navigation source as
the GNS 430W CDI outputs.
N O T E
P a g e 5 - 1 3
R e v . A