Installation and Operating Instructions
Sizes and Specifications, Glass Frosters
MOdELS
LENGTH (mm)
INTERIoR CU. FT. (m
PLATE CAPACITY
†
GLASS CAPACITY
†
(w/2 optional Shelves)
WITH oPTIoNAL THIRD SHELF
CoNDENSING UNIT H.P.
AMPS
SHIP WT lbs. (kg)
INTERIoR
EXTERIoR
DooRS (Sliding)
ELECTRICAL
PLUMBING
INSULATIoN
TEMPERATURE RANGE
REFRIGERATIoN
VENTILATIoN
DEFRoST SYSTEM
oPTIoNAL ACCESSoRIES
† Capacity calculations based on use of 3" dia. glass and 9
®�
c
SANITATION
U L
24" [610]
®�
11 5/8"
[296]
NSFI NO 7-1990
9 5/8" [244]
34 1/8"
[867]
8 7/8" [225]
2"
2"
[51]
[51]
END VIEW
24" CABINET
FR24
24" (610)
)
3.75 (0.10)
3
135 Plates
90 Glasses
N/A
1
/
3
5.8
190 (86)
All models have stainless steel walls and floor.
Choice of black, stainless steel and all stainless.
Black Option: Front and ends are black vinyl coated steel, back and bottom are galvanized.
Stainless Steel Option: Front and ends are stainless steel, back and bottom are galvanized.
All Stainless Option: Front, ends, back and bottom are all stainless steel.
Stainless steel top and bottom pans. Die cast handle.
115V, 60 Hz., 1 Phase. Furnished with 6 foot rubber plug-in cord (115V model only). Also available in
230V, 50Hz., 1 Phase AC. carries
None required. Moisture drains to self-evaporating condensing pan in machinery compartment.
2 inch foamed-in-place polyurethane insulation.
Adjustable from -10° to +10° F.
R134a expansion valve system with hermetic condensing unit. Pulls out for service and cleaning.
2' model is front vented, all other models require 2" clearance from wall either on left end or back of
cabinet for proper air flow.
Solid-state, push-button defrost system, manually initiated at end of each day, automatically termi-
nates after six hours. Evaporator automatically defrosts every 4 hours for approximately 20 minutes
(time/temperature terminated).
• Additional set of nesting shelves w/ brackets
• Set of 4 adjustable legs
1
⁄
" dia. x
2
SANITATION
U L
®�
CLASSIFIED TO
NSFI NO 7-1990
24" [610]
2"
[51]
OPTIONAL
6 5/8"
FIELD
[169]
INSTALLED
5 3/4"
SHELF
[146]
LOCATION
5 3/4"
[146]
FACTORY
INSTALLED
SHELF
LOCATION
FRONT VIEW
24" CABINET
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
FR36
36" (915)
7.83 (0.22)
215 Plates
142 Glasses
172 Glasses
1
/
3
6.8
245 (111)
marking of conformity.
• Set of 4 casters w/ brakes
• 2', 3', 4' and 5' Bottle rail (field installed)
1
⁄
" thick plate.
2
11 5/8"
24" [610]
[295]
2"
2" [50]
[51]
OPTIONAL
SHELF
19 1/4"
[489]
INSIDE
34"
[864]
END VIEW
36", 48", 60" CABINET
2
Job ___________________________
Area __________________________
Item No. _______________________
Model No. _____________________
FR48
48" (1219)
11.68 (0.33)
300 Plates
214 Glasses
273 Glasses
1
/
3
6.2
265 (120)
• Interior light
• Roller basket shelving
36" [914]
48" [1219]
60" [1524]
2" [50]
2" [50]
6 7/8"
[175]
13 7/8" [352]
7"
TOP SHELF
[178]
CENTER SHELF
17 3/16"
BOTTOM SHELF
[437]
HOUSING
STEP
FRONT VIEW
36", 48", 60" CABINET
FR60
60" (1524)
15.53 (0.44)
400 Plates
286 Glasses
363 Glasses
1
/
3
7.1
300 (136)
2" [50]
27 7/8"
[708]
7" [178]
INSIDE
7" [178]
Form No. Z2296
Rev. 12.05.09
Need help?
Do you have a question about the FR24 Series and is the answer not in the manual?