2.10 Installing A Floppy Disk Drive - Asus V-Series P5G31 Installation Manual

2.10 Installing a floppy disk drive
The system comes with one 3.25-inch drive bay for a floppy disk drive.
To install a floppy disk drive:
1. Remove the drive slot metal plate cover.
2. Carefully insert the floppy disk drive into the floppy drive bay until the screw
holes align with the holes on the bay.
3. Secure the floppy disk drive with two screws on both sides.
3 3
4. Connect the floppy disk drive signal cable to the signal connector at the back
of the drive.
2-22
3 3
2 2
Power cable
Floppy ribbon cable
Chapter 2: Basic installation
remove the metal
plate cover and
install the card
reader module here