Connection between the quick connect cable and appliance
Caution
The wiring colors of the connector on one of the
1
appliances to be connected differ from the wiring
colors of the connection cord.
* It makes no difference whether the remote
controller is connected to appliance A or B.
Carry out the following if two appliances are to be
linked.
1. Turn off power to the appliances.
2. Remove the front cover of the appliance. (Four
screws)
3. Introduce the connection cord through the electric
cable connection hole to the appliance.
4. Connect the connector for the connection cord
and the connector for the appliance to be linked.
5. Attach the earth from the connection cord to the
terminal block. (If not earthed, it may operate erro-
neously due to interference, etc.)
6. Secure the connection cord with the clamp.
7. Replace the front cover.
Installation Instructions
Connection cord
Wiring
Throughway
Quick
Connect Cord
(An optional connection cord is required for
simple linkage of two appliances.)
1.Red
1.Red
1.White
2.Black
2.Black
2.Green
3.White
3.White
3.Red
4.Green
4.Green
4.Black
5.Blue
5.Blue
5.Blue
6.Blue
6.Blue
6.Blue
A
Tag:
"Connection cord Z shield: 2 A"
Clamp
Linked using connector
1.Red
2.Black
3.White
4.Green
5.Blue
6.Blue
B
Earth
connection
23