Assembly Instructions - Landa SLT Operator's Manual

Water
Inlet
Garden
Hose
STEP 1: Attach a 5/8" water supply
hose to inlet connector. Minimum
flow should be 10 GPM depending
on model of machine.
High
Pressure
Hose
STEP 4: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
Dipstick
STEP 7: Check oil level by using
supplied dip-stick. Use SAE 30W
non-detergent only.

ASSEMBLY INSTRUCTIONS

Collar
STEP 2: Attach high pressure hose
to discharge nipple using quick cou-
pler. Lock coupler securely by pull-
ing back coupler collar, inserting
onto discharge nipple and pushing
collar forward until secure.
Spray Gun
Pressure
Nozzle
STEP 5: Before installing nozzle, turn
on water supply and run machine
allowing water to flush through the
system until clear. Pull the spring-
loaded collar of the wand coupler collar
back to insert your choice of pressure
nozzle. CAUTION: Never replace
nozzles without engaging the safety
latch on the spray gun trigger.
Oil
Tank
STEP 8: Fill fuel oil tank. Do not
confuse gasoline and fuel oil tanks.
Keep proper fuel in proper tank.
Landa SLT/SLX Diesel • 8.914-003.0 • Rev. 12/11
Discharge
Nipple
High
Pressure
Hose
89140030-5
Coupler
Collar
Wand
Safety Latch
STEP 3: Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage.
Pressure
Nozzle
Coupler
Collar
STEP 6: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
STEP 9: Install proper battery
making sure that the red cable is
attached to the positive terminal.
Use a 12V group 24 style battery.
Trigger
Gun
7