Bulbs - License Plate Lighting; Bulbs - Cargo Area Lighting - Volvo V 60 Owner's Manual

Hide thumbs Also See for V 60:
Table of Contents

Advertisement

10 Maintenance and servicing
||
10
1. Open the panel.
2. Pull the insulation in front of the bulb
holder straight out.
3. Press down the catch and pull out the
bulb holder.
4. Remove the defective bulb by pressing it
in and turning it counterclockwise.
5. Press a new bulb into place and turn it
clockwise.
6. Hold down the catch and press the bulb
holder back into place.
7. Put the insulation and panel back in
place.
Related information
Bulbs – introduction (p. 336)
Bulbs – specifications (p. 343)
342
Bulbs – license plate lighting
The license plate lighting is located next to
the tailgate handle.
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing
and pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and
tighten the screws.
Related information
Bulbs – specifications (p. 343)
Bulbs – cargo area lighting
The cargo area light is located in the ceiling
liner.
1. Insert a screwdriver and gently turn so
that the bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
it back into the bulb housing.
Related information
Bulbs – specifications (p. 343)

Advertisement

Table of Contents
loading

This manual is also suitable for:

V60

Table of Contents