Changing A Wheel - Installing Wheel - Volvo V 60 Owner's Manual

7. If there is a wheel in the bag, strap the
bag securely in place in the cargo area.
WARNING
•
If there is a wheel in the bag, the bag
must be securely restrained using its
straps and the load anchoring eyelets in
the cargo area. See (p. 295) and care-
fully follow the instructions.
•
If the wheel with the punctured tire is
too big to fit in the bag, it should be
securely restrained in the cargo area
using suitable straps, a net for anchor-
ing cargo, etc.
Changing a wheel – installing wheel
It is important to re-install wheels properly.
Re-installing the wheel
1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
Tighten the wheel nuts
3. Install the wheel nuts and tighten hand-
tight. Using the lug wrench, tighten cross-
wise until all nuts are snug.
4. Lower the vehicle to the ground and alter-
nately tighten the bolts crosswise to
103 ft. lbs. (140 Nm).
5. Install the wheel cover (where applicable).
The opening in the wheel cover for the
tire's inflation valve must be positioned
over the valve.
09 Wheels and tires
Related information
•
Changing a wheel – spare wheel (p. 295)
•
Changing a wheel – removing wheel
(p. 293)
09
297