Panasonic PV-GS29P Service Manual page 58

PV-GS29P / PV-GS36P / PV-GS39P / PV-GS59P / PV-GS29PC / PV-GS39PC / PV-GS59PC
11. Installation of Front P.C.B.
1) Install the LED Light Lens into the Front Case Unit.
2) Install the Front P.C.B. with the 7 bosses and the 5
Screws (533).
Front P.C.B.
boss
533
boss
533
bosses
Front Case
12. Removal of R Shaft Case Unit, LCD Case A Unit
1) Open and rotate the LCD to access the 2 Screws (519)
as shown below.
2) Release the 8 Locking Tabs (L-1) and remove the LCD
Case A Unit.
3) Disconnect the F.P.C. from Connector FP8101.
4) Remove the R Shaft Case Unit.
R Shaft Case Unit
LCD F.P.C.
533
bosses
boss
533
533
Fig. D12
Rotate to access
519
519
LCD (Ass'y)
FP8101
(L-1)
LCD Case A Unit
Fig. D13
58