Panasonic PV-GS29P Service Manual page 57

9. Removal of Cassette Cover Unit
1) Remove the 3 Screws (519).
2) Disconnect the F.P.C. from Connector FP7001.
3) Pull off the Mechanism Ass'y & Main P.C.B.
Cassette Cover Unit
519
519
Fig. D10
10. Installation of Main P.C.B.
Take care not to damage the F.P.C.s.
1) Connect the F.P.C.s to the connectors on the Main
P.C.B., verifying that the direction of the Flexible Cables
is correct. Refer to "REMOVAL/INSTALLATION OF
F.P.C. FROM NON ZIF (Zero Insertion Force)
CONNECTOR."
2) Tighten the 2 Screws (545).
3) After installing the Main P.C.B, confirm the F.P.C.s are
positioned as shown.
Main P.C.B.
545
Capstan
Sub Mechanism
F.P.C.
F.P.C.
519
FP7001
545
Mechanism Chassis Ass'y
Cylinder Head
F.P.C. Amp
Mechanism
F.P.C.
F.P.C.
PV-GS29P / PV-GS36P / PV-GS39P / PV-GS59P / PV-GS29PC / PV-GS39PC / PV-GS59PC
Replacement of Mechanism Chassis Ass'y
When replacing the Main Chassis Ass'y or the Cylinder
Unit, be sure to perform the Envelope Output Adjustment.
Refer to "ENVELOPE OUTPUT ADJUSTMENT" in
MECHANICAL ADJUSTMENT.
Mechanism Chassis Ass'y Handling Caution
When servicing the Mechanism Chassis Ass'y without the
Cassette Up Unit, do not handle the Sub Chassis of the
Mechanism Chassis Ass'y.
Mechanism Chassis Ass'y
(without Cassette Up Unit)
Sub Chassis
Sub Chassis
<Side View>
57
Sub Chassis
Fig. D11-2