Exchange Method Of Zoom Gear Block - Sony Cyber-Shot DSC-W80 Service Manual

2-4. EXCHANGE METHOD OF ZOOM GEAR BLOCK

Note: Do not hold the part of terminal and the part of spring.
2-4-1. HOW TO REMOVE THE ZOOM GEAR BLOCK
•
HOW TO REMOVE THE REAR ASSEMBLY
1 Remove the screw, and then the OVF.
2 Remove the shutter flexible board from the connector.
3 Remove the vibration-proof flexible board from the connector.
4 Peel the adhesive sheet that secures the vibration-proof flexible board.
* When peeling the adhesive sheet, turn it over from the opposite side of the hook.
Connector
3 Vibration-proof flexible board
DSC-W80/W85_L2
OVF
Screw
Connector
2 Shutter flexible board
Vibration-proof flexible board
2-8
4 Adhesive
sheet
Hook