Sony Cyber-Shot DSC-W80 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. Cyber-shot DSC-W80
  6. Service manual
Sony Cyber-Shot DSC-W80 Service Manual

Sony Cyber-Shot DSC-W80 Service Manual

Digital still camera
Hide thumbs Also See for Cyber-Shot DSC-W80:
Table of Contents

Advertisement

Quick Links

See also: Handbook , Instruction Manual
SERVICE MANUAL
Ver. 1.0 2007.03
Revision History
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
Internal memory
Internal memory
ON BOARD
ON BOARD
Link
Link
SPECIFICATIONS
MODEL INFORMATION TABLE
SERVICE NOTE
• Precaution on Replacing the SY-173 Board
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
DSC-W80/W85_L2
9-852-194-31
DSC-W80/W85
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAM
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Sony EMCS Co.
Photo: Silver
DIGITAL STILL CAMERA
LEVEL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Japanese Model
Tourist Model
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
Published by Kohda TEC
2
2007C0500-1
© 2007.3

Advertisement

Table of Contents
loading

Related Manuals for Sony Cyber-Shot DSC-W80

Summary of Contents for Sony Cyber-Shot DSC-W80

  • Page 1 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié. DIGITAL STILL CAMERA 2007C0500-1 DSC-W80/W85_L2 © 2007.3 Sony EMCS Co. 9-852-194-31 Published by Kohda TEC...

  • Page 2: Specifications

    Movies: MPEG1 compliant (Monaural) protrusions) Recording media: Internal Memory (approx. Mass: 31 MB), “Memory Stick Duo” DSC-W80: Used battery: Lithium-ion battery Flash:Flash range (ISO sensitivity Approx. 155 g (5.5 oz) (including NP- Maximum voltage: DC 4.2 V (Recommended exposure Index) set to Auto): BG1 battery pack and strap, etc.)
  • Page 3 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 4: Table Of Contents

    4-1. Frame Schematic Diagram ·············································· 4-1 4-2. Schematic Diagrams ························································ 4-3 4-3. Printed Wiring Boards ··················································· 4-21 4-4. Mounted Parts Location ················································ 4-31 REPAIR PARTS LIST 5-1. Exploded Views ······························································· 5-2 5-2. Electrical Parts List ························································· 5-7 DSC-W80/W85_L2 — 4 —...

  • Page 5: Service Note

    Repaired by: Block C : Corrected by customer Indicates the appropriate Refer to “1-2-3. Self-diagnosis Code Table”. E : Corrected by service step to be taken. engineer E.g. 13 ..Format the “Memory Stick Duo”. 32 ..Turn on power again. DSC-W80/W85_L2...

  • Page 6: Process After Fixing Flash Error

    2 Select [OK] with v, then press z. The settings are reset to the default setting. To cancel the resetting Select [Cancel] in step 2, then press z. • Make sure that the power is not disconnected during resetting. DSC-W80/W85_L2...
  • Page 7 1 Select [Format] with v/V/b/B on the control button, then press z. The message “All data in internal memory will be erased” appears. 2 Select [OK] with v, then press z. The format is completed. To cancel the formatting Select [Cancel] in step 2, then press z. DSC-W80/W85_L2...

  • Page 8: How To Write Data To Internal Memory

    To change the setting, use the write enable tool “WriteEnableTool.exe”. Data writing method Connect the PC to the camera (USB mode: Mass Storage), and switch the driver to the “Sony Seus USB Driver”. Start the Write Enable Tool and the SeusEX.
  • Page 9 ENGLISH JAPANESE ENGLISH JAPANESE 1. SERVICE NOTE C : 3 2 : 00 “ ” DSC-W80/W85_L2...
  • Page 10 ENGLISH JAPANESE ENGLISH JAPANESE ql w; DSC-W80/W85_L2...
  • Page 11 ENGLISH JAPANESE ENGLISH JAPANESE / / / “ ” 32MB “ ” / / / “ ” “ ” “ ” / / / DSC-W80/W85_L2...
  • Page 12 ENGLISH JAPANESE ENGLISH JAPANESE “ ” [Activate Write Enable Mode] DSC-W80/W85_L2 1-8E...

  • Page 13: Disassembly

    To preparing the short jig, a small clip is attached to each end of a resistor of 1 kΩ /1 W (1-215-869-11). ST-160 Board Wrap insulating tape fully around the leads of the resistor to C901 prevent electrical shock. 1 kΩ/1 W Flash Unit Wrap insulating tape. DSC-W80/W85_L2...

  • Page 14: Identifying Parts

    ⋅ MC-176 Board ⋅ Release Block ⋅ SY-173 Board 2-2-3. LCD/BT HOLDER SECTION 2-3. EXCHANGE METHOD OF 2-4. EXCHANGE METHOD OF ⋅ BT Holder BARRIER BLOCK ZOOM GEAR BLOCK ⋅ Flash Unit ⋅ LCD Module ⋅ Main Frame ⋅ SW-494 Board DSC-W80/W85_L2...

  • Page 15: Disassembly

    1-6 (#65) 1-7 (Open) 1-4 (#65) HELP 2 Cabinet (Rear) 2-2 (#65) (Claw) 1-1 (#65) Main Board Section (See Page 2-4) 1-2 (Claw) (#65) 1 Cabinet (Front) DSC-W80/W85_L2...
  • Page 16 (See Page 2-5) (Release the claw that is the fixation of the flash unit once) (Claw) 3-7 (Claw) HELP 3-11 (Claw) - 1 7 (#5) (Solder) HELP (#3) 3-10 2 Lens Block (See Page 2-6, 2-8) 3 SY-173 Board DSC-W80/W85_L2...

  • Page 17: Lcd Panel

    1 Flash Unit (1-1) 2 LCD Panel/SW-494 Board (2-1 to 2-4) 3 BT Holder (3-1 to 3-3) 2 LCD Panel/ SW-494 Board (#5) - 4 9 HELP (Claw) HELP (Claw) 3-1 (#65) (Claw) (Claw) 3 BT Holder HELP 1 Flash Unit DSC-W80/W85_L2...

  • Page 18: Exchange Method Of Barrier Block

    Barrier tape 3 Solvent 4 Ornamental ring (A) Barrier block 2-3-2. HOW TO REMOVE THE BARRIER BLOCK 1 Remove two screws. 2 Remove the barrier block and the inner ring. 2 Barrier block 2 Inner ring 1 Two screws DSC-W80/W85_L2...
  • Page 19 Note: Turn on and off the power to check the opening and closing of the barrier block with the camera in horizontal, up and down directions respectively. Further, check the zoom motion. Rotate the ornamental ring (A) lightly to check that it is not removed. DSC-W80/W85_L2...

  • Page 20: Exchange Method Of Zoom Gear Block

    4 Peel the adhesive sheet that secures the vibration-proof flexible board. * When peeling the adhesive sheet, turn it over from the opposite side of the hook. Vibration-proof flexible board 4 Adhesive sheet Connector 2 Shutter flexible board Hook Connector 3 Vibration-proof flexible board DSC-W80/W85_L2...
  • Page 21 Remove the main flexible board from the ring assembly, and remove the rear assembly and the nuruto gear. qa Nuruto gear 8 Four screws Rear assembly Hook q; Z leaf Ring assembly spring Boss Ring assembly Boss qa Rear assembly qa Main flexible Vibration-proof flexible board board DSC-W80/W85_L2...
  • Page 22 1 Solder the main flexible board to the zoom gear block. 2 Install the main flexible board to the zoom gear block. 3 Attach the FG leaf spring. Rear assembly 2 Main flexible board Zoom gear block 2 Main flexible board Hook 1 Solder 3 FG leaf spring DSC-W80/W85_L2 2-10...
  • Page 23 8 Check that the projection of the nuruto shaft that protrudes from the rear assembly is within the specified value given below. * Specified value: 0.005 – 0.395mm Hook Ring assembly Boss 6 Vibration-proof flexible board Boss 7 Four screws Nuruto shaft 6 Rear assembly 5 Zoom gear block Nuruto shaft 0.005 – 0.395mm DSC-W80/W85_L2 2-11...
  • Page 24 Main flexible board Hook Adhesive sheet (upper) Adhesive sheet (lower) q; Secure and connect the vibration-proof flexible board and the shutter flexible board respectively. Vibration-proof flexible board Adhesive sheet Connector Hook Shutter flexible board Connector Bousin flexible board DSC-W80/W85_L2 2-12...
  • Page 25 Confirm there are neither dirt nor wounds in the surface of the ornamental ring (A) and lens if there is no problem in operation. Wipe off when dirty. 3 Confirm the operation with Wide/Tele. Note: Do not be of caught etc. Do not allophone. DSC-W80/W85_L2 2-13E...
  • Page 26 HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. Cabinet (front) assy SY electrostatic sheet RL-071/078 Harness (Black) board Microphone Harness (Red) BT holder Main frame Light interception sheet LC flexible sheet DSC-W80/W85_L2 HELP...
  • Page 27 * The battery terminal board is attached with the notch for installation. BT holder Notch Battery terminal board Battery terminal board 2 Fold the notch 3 or 4 times repeatedly to break. Notch Battery terminal board Notch • HARNESS ARRANGEMENT Harness (Red) Harness (White) SY-173 board Harness (Black) DSC-W80/W85_L2 HELP...

  • Page 28: Block Diagrams

    3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (2/2) POWER BLOCK DIAGRAM (2/2) DSC-W80/W85_L2...
  • Page 29 SE502 PITCH PITCH± SWBOUT PITCH IC503 MOTOR SENSOR OPTICAL PITCH_HALL_BIAS±, IMAGE CA_FD STABILIZATION HALL PITCH_HALL± DRIVE XDD_SYS_RST XDD_SYS_RST ELEMENT (3/10) : VIDEO SIGNAL OVERALL (2/2) IC_211_0_SO, IC_211_0_SI, XIC_211_0_SCK : AUDIO SIGNAL (PAGE 3-2) : VIDEO/AUDIO SIGNAL CLK_IC_503 XCS_IC_503 XIC_211_IC_503_RST DSC-W80/W85_L2...

  • Page 30: Overall Block Diagram (1/2)

    AF LED AFLED_CONT SELF-TIMER/ CONTROL AF ILLUMINATOR T001 Q704 D001 D706 XE_A(H) ST_UNREG (MS ACCESS) TRIGGER FLASH TRIG_GND UNIT C901 CHARGING STRB_CHG STRB_CHG CAPACITOR IC001 XSTRB_FULL XSTRB_FULL XE_K(L) FLASH STB_CHG_CNT STB_CHG_CNT CONTROL, CHARGE Q001 CONTROL STRB_ON STRB_ON1 FLASH DRIVE DSC-W80/W85_L2...

  • Page 31: Power Block Diagram (1/2)

    DISW2P9_EN C1 POWER (2/2) (PAGE 3-4) DISW2P9_EN VL_3V BACK UP VCC XRSTX D7 IC102 (8/10) 1.2V_INT DDC1P2_RESET C8 VBAT VOUT 6 EVER_3.0V VRO 8 D101 DDC2P9_EN IC007 POWER (2/2) XRESET VOLTAGE (PAGE 3-4) DETECT (9/10) Vin 4 Vout Vsen 3 DSC-W80/W85_L2...

  • Page 32: Power Block Diagram (2/2)

    Z_BOX1_PI_SENS_Vcc SIO1_TXD POWER (1/2) ZOOM XIC_211_1_SCK Z_BOX2_PI_SENS_Vcc (PAGE 3-3) SIO1_SCK XCS_IC_201 Q305 GPS_04 R411 2.8V/3.2V DISCHARGE R401 FOCUS F_PI_SENS_Vcc RESET MS_PWR_ON XZM_RST_LED XDD_SYS_RST SENSOR GPE_15 GPE_03 J8 RESET POWER (1/2) (PAGE 3-3) D_3.0V MAX_5.0V IC401 A_3.0V LENS DRIVE (2/10) DSC-W80/W85_L2...

  • Page 33: Printed Wiring Boards And Schematic Diagrams

    CONNECTOR IC211 (Not supplied) LENS BLOCK CN710 LEVEL3 LEVEL3 SY-173 BOARD SY-173 BOARD SP901 (SIDE B) (SIDE A) SPEAKER MC-176 BOARD (SIDE A) CN101 Note: CN101 is no mount. (Direct solder) MC-176 BOARD (SIDE B) CN102 MULTI CONNECTOR DSC-W80/W85_L2 FRAME...

  • Page 34: Schematic Diagrams

    4-2. SCHEMATIC DIAGRAMS Link Link MC-176 BOARD (MULTI CONNECTOR) ST-160 BOARD (FLASH DRIVE) RL-071/078 BOARD SW-494 BOARD (CONTROL SWITCH) (CONTROL SWITCH, MIC) COMMON NOTE FOR SCHEMATIC DIAGRAMS DSC-W80/W85_L2...
  • Page 35 In addition, ensure that the receiver is not covered with dusts nor exposed to strong light. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifie. DSC-W80/W85_L2...
  • Page 36 Schematic diagrams of the CD-701 flexible and SY-173 boards are not shown. Pages from 4-5 to 4-15 are not shown. DSC-W80/W85_L2...
  • Page 37 REG_GND V_GND CHARGE_V XACC_IN HD Y ACV_UNREG XACC_IN ACV_UNREG Note:CN101 is not mounted.Flexible flat cable (FFC-095) is soldered to this location instead. LND102 STATIC_GND This FFC-095 is not supplied, but this is included in MC-176 complete board. DSC-W80/W85_L2 MC-176 4-16...
  • Page 38 HIGH SENS SOFT SNAP TWILIGHT PORTRAIT TWILIGHT R006 LANDSCAPE 2200 RB002 LANDSCAPE 2200 BEACH SNOW MOVIE S003 PROGRAM AUTO R007 S011 2200 (MODE DIAL) Note:S011(mode dial) is not supplied, but this is included in SW-494 complete board. DSC-W80/W85_L2 SW-494 4-17...
  • Page 39 STRB_CHG Page 4-15 XE_K(L) of Level 3 XSTRB_FULL AF_5.0V R002 XAF_LED Q001 CY25BAJ-8F-T23-G02 FLASH DRIVE C005 C002 PGND IC001 R003 PGND FLASH CONTROL, R005 CHARGE CONTROL D002 IC001 CL-360S-TD4-X-TL TPS65552RGTR SELF-TIMER/ F_ON XFULL AF ILLUMINATOR C006 CL001 DSC-W80/W85_L2 ST-160 4-18...
  • Page 40 D_3.0V (FFC-094) REG_GND Page 4-15 of Level 3 XSHUTTER_SW S101 (SHUTTER) XAE_LOCK_SW C001 C002 0.047u 0.047u Note:CN101 is not mounted. Flexible flat cable (FFC-094) is soldered to this location instead. LND103 STATIC_GND LND104 STATIC_GND DSC-W80/W85_L2 RL-071/078 4-19...

  • Page 41: Printed Wiring Boards

    4-3. PRINTED WIRING BOARDS Link Link MC-176 BOARD ST-160 BOARD SW-494 BOARD RL-071/078 BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION DSC-W80/W85_L2...
  • Page 42 (The other layers’ patterns are not indicated) • Through hole is omitted. • Circled numbers refer to waveforms. • There are a few cases that the part printed on diagram isn’t mounted in this model. • C: panel designation DSC-W80/W85_L2 4-21...
  • Page 43 Printed wiring boards of the CD-701 flexible and SY-173 boards are not shown. Pages from 4-23 to 4-25 are not shown. DSC-W80/W85_L2...
  • Page 44 RB002 MENU (DISP) RB003 S006 (MACRO) (FLASH) (SET) D005 R001 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. S001 D003 1-871-501- LND001 1-871-501- (SELF TIMER) LND004 HOME DSC-W80/W85_L2 MC-176, SW-494 4-26...
  • Page 45 1-874-109- LND103 D101 (POWER) 1-874-109- S102 S101 POWER (SHUTTER) MIC901 MICROPHONE BLOCK RL-078 BOARD (SIDE B) LND102 LND101 CN101 1-874-109- LND104 Note: CN101 is not mounted. Flexible flat cable (FFC-094) is soldered to this location instead. DSC-W80/W85_L2 ST-160, RL-071/078 4-27...
  • Page 46 Mounted parts location of the SY-171 board is not shown. Pages 4-29 and 4-30 are not shown. DSC-W80/W85_L2...

  • Page 47: Mounted Parts Location

    R001 D001 R005 * D002 R006 D003 R007 IC001 RB001 A-5 RB002 C-4 L001 RB003 C-4 * Q001 S001 S002 * R002 S003 * R003 S004 R004 S005 R006 S006 S007 T001 S008 S009 S010 S011 DSC-W80/W85_L2 SW-494, ST-160 4-31E...

  • Page 48: Repair Parts List

    NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link CABINET SECTION MAIN BOARD SECTION LCD/BT HOLDER SECTION LENS SECTION ELECTRICAL PARTS LIST ELECTRICAL PARTS LIST Link Link ACCESSORIES ACCESSORIES MC-176 BOARD ST-160 BOARD SW-494 BOARD RL-071/078 BOARD DSC-W80/W85_L2...
  • Page 49 AUS : Australian model : Brazilian model : Chinese model CND : Canadian model : East European model HK : Hong Kong model : Japanese model : Tourist model : Korea model : North European model TW : Taiwan model DSC-W80/W85_L2...

  • Page 50: Exploded Views

    X-2177-065-1 CABINET (REAR) ASSY (W85) 3-197-910-01 SHEET, SY ELECTROSTATIC 3-099-626-01 SHEET, LCD WINDOW ADHESIVE 3-099-624-01 WINDOW, LCD 3-099-623-01 CABINET, SIDE 3-099-625-01 PLATE, MODE X-2177-061-1 CABINET (REAR) ASSY (W80: SILVER) 2-635-591-01 SCREW (M1.4), NEW TRUSTAR P2 (Silver) X-2177-062-1 CABINET (REAR) ASSY (W80: BLACK) DSC-W80/W85_L2...
  • Page 51 3-099-622-01 SHAFT, STRAP 3-080-204-01 SCREW, TAPPING, P2 (Black) A-1246-051-A MC-176 BOARD, COMPLETE * 62 3-099-639-01 SHEET, MC RADIATION 3-086-156-11 SCREW B1.2 (White) * 63 3-099-629-01 RETAINER, MULTI 2-635-591-01 SCREW (M1.4), NEW TRUSTAR P2 (Silver) * 64 3-099-635-01 SHEET, MC INSULATING DSC-W80/W85_L2...
  • Page 52 * 107 3-100-059-01 SHEET, LC FLEXIBLE ADHESIVE LCD901 1-802-379-11 LCD MODULE (LQ025A3DD01) * 108 3-197-557-01 SHEET, LIGHT INTERCEPTION 3-080-204-01 SCREW, TAPPING, P2 (Black) A-1246-053-A SW-494 BOARD, COMPLETE 2-635-591-01 SCREW (M1.4), NEW TRUSTAR P2 (Silver) * 110 3-100-060-01 SHEET, SW DSC-W80/W85_L2...
  • Page 53 2-689-851-01 RING (A), ORNAMENTAL (Note 1) X-2177-203-1 GEAR (S), NARUTO (Note 2) 2-691-890-01 TAPE, BARRIER (Note 1) M901 1-479-864-11 GEAR BLOCK, ZOOM (1160) (Note 2) A-1205-001-A BARRIER BLOCK ASSY (Note 1) 3-086-156-11 SCREW B1.2 (White) 2-689-849-01 SPRING, Z LEAF (Note 2) DSC-W80/W85_L2...
  • Page 54 Electrical parts list of the CD-701 board is not shown. Page 5-6 is not shown. DSC-W80/W85_L2...

  • Page 55: Electrical Parts List

    1-786-885-42 SWITCH, TACTILE (v (DISP)) S007 1-786-885-42 SWITCH, TACTILE (MENU) S008 1-786-885-42 SWITCH, TACTILE (b (MACRO)) • Refer to page 5-1 for mark 0. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. DSC-W80/W85_L2...
  • Page 56 Ref. No. Part No. Description S009 1-786-885-42 SWITCH, TACTILE (HOME) S010 1-786-885-42 SWITCH, TACTILE (z (SET)) S011 (Not supplied) ROTARY SWITCH (MODE DIAL) Electrical parts list of the SY-173 board is not shown. Pages 5-9 to 5-13 are not shown. DSC-W80/W85_L2...
  • Page 57 2-674-454-31 (Note) Conversion (2P) Adaptor Soft Carrying Case (W85) CD-ROM 0 1-569-008-12 (E: NTSC) 3-106-988-01 (Cyber-shot Application Software/ “Cyber-shot Handbook”/ “Cyber-shot Step-up Guide”) 3-094-911-01 (EXCEPT US) 3-196-435-01 (US) 3-198-533-01 (J) • Refer to page 5-1 for mark 0. DSC-W80/W85_L2 5-14...

  • Page 58: Checking Supplied Accessories

    3-094-996-61 HANDBOOK (PDF) (TURKISH) 3-095-005-51 MANUAL, INSTRUCTION (TURKISH, GREEK) (W80: AEP/W85: AEP) 3-094-996-71 HANDBOOK (PDF) (GREEK) 3-095-005-61 MANUAL, INSTRUCTION (ENGLISH, SPANISH) Note: Handbooks (PDF) of each language are included in (W80: US) CD-ROM “ImageMixer for HDD Camcorder” (Software)/ “Handycam Handbook” (PDF). DSC-W80/W85_L2 5-15E...
  • Page 59 HARDWARE LIST (1/4) #1: M1.7 X 2.5 #2: M1.7 X 4.0 #3: M1.7 X 2.5 #4: M1.4 X 2.5 (Tapping) (Black) (Black) (Red) (Dark Silver) 2-635-562-11 2-635-562-31 2-660-401-01 3-348-998-81 #5: M1.7 X 3.5 (Tapping) #6: M1.4 X 1.7 #7: M1.7 X 1.6 #8: M1.7 X 3.5 (Tapping) (Black) (Silver)
  • Page 60 HARDWARE LIST (2/4) #21: M1.4 X 3.0 #22: M1.7 X 5.0 (Tapping) #23: M1.7 X 4.0 (Tapping) #24: B1.7 X 5.5 (Tapping) (Black) (Silver) (Black) (Black) 2-662-396-21 3-083-261-01 3-080-204-11 4-679-805-11 #25: M1.7 X 3.0 #26: M1.4 X 2.0 #27: M1.4 X 2.0 #28: M1.4 X 4.0 (Tapping) (Black) (Silver)
  • Page 61 HARDWARE LIST (3/4) #41: M3.0 X 8.0 (Tapping) #42: M2.0 X 4.0 (Tapping) #43: M1.7 X 4.0 #44: M1.7 X 3.0 (Tapping) (Silver) (Silver) (Red) (Silver) 3-065-748-01 7-628-253-00 2-660-401-31 3-078-890-61 #45: M1.4 X 2.5 #46: M1.7 X 3.0 #47: M1.4 X 3.0 (Tapping) #48: M1.7 X 2.5 (Silver) (Red)
  • Page 62 HARDWARE LIST (4/4) #64: M1.7 X 5.0 (Tapping) #61: M3.0 X 10.0 #62: M2.0 X 3.0 #63: M5.0 X 12.5 (Silver) (Black) (Silver) (Black) 2-666-551-21 7-682-549-09 3-080-202-21 3-060-811-21 12.5 10.0 #65: M1.4 X 3.5 #66: M1.4 X 1.4 #67: M1.4 X 2.0 #68: M1.7 X 4.0 (Silver) (Silver)
  • Page 63 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.

  • Page 64: Revision History

    Reverse 985219431.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2007.03 Official Release — — DSC-W80/W85_L2...

This manual is also suitable for:

Cyber-shot dsc-w85Cybershot dsc-w80

Table of Contents