Care And Maintenance; Cleaning The Bobbin Case And Hook Area; Assembling The Bobbin Case Into Hook Area - Singer S10 Instruction Manual

z
q
w
x
y
c
y
v
b
z
e
e
x
e
e
t
r
u
u
i
i
q
e

CArE AND MAINTENANCE

Cleaning the Bobbin Case and Hook Area

WArNING
Turn the power switch off and unplug the machine
before cleaning.
NOTE
Do not dismantle the machine in any way other than
what is explained in this section.
Clean the outside of the machine with a soft cloth and
mild soap.
z Remove the setscrews with the screwdriver supplied
with the machine. Remove the needle plate and
presser foot.
q Setscrew
w Presser foot
e Screwdriver
r Setscrew
t Needle plate
x Lift up the bobbin case y and remove it.
y Bobbin case
c Clean the bobbin case with the lint brush u.
u Lint brush
v Clean the hook area with the lint brush.
i Hook area
b Clean the hook area with a dry cloth.

Assembling the Bobbin Case into Hook Area

z Insert the bobbin case so that the knob fits next to
the stopper in the hook area.
q Knob
w Stopper
w
x Reattach the presser foot and needle plate.
Align the needle plate guide pins with the guide
holes on the needle plate and tighten the screw.
e Needle plate guide pins
NOTE
After cleaning the machine, make sure the needle
is inserted correctly and the presser foot is attached
securely.
49