Panasonic SA-AK240E Service Manual page 20

SA-AK240E / SA-AK240EB / SA-AK240EG
Error Code Diagnosis Contents Description of error
ITOP UD assembly
IUDS UD assembly
HOME Cam gear/gear
assembly abnormal
LOAD Tray drive assembly
abnormal
PDRV Cam gear/gear
assembly abnormal
UDU UD base asssembly
abnormal
UDD UD base asssembly
abnormal
UD1 UD base asssembly
abnormal
F1NG Fail - safe mode. (For
open/close tray
unit(s))
Automatic FL Display
UD Rack does not
move to front
direction. This lead to
UD base not raise to
top position.
After TOP SW is
detected, UD rack
does not move into
tray 1 position.
Cam gear does not
move to "HOME"
position under
following conditions
1. After tray is load
to "PLAY"
position.
2. After tray is
unload to
"STOCK" position.
Tray unit does not
move from "STOCK"
to "PLAY" position
Cam gear does not
move from "HOME" to
"PLAY" drive position.
UD Base assembly
does not move
upwards from tray 5 to
tray 2
UD Base assembly
does not move
downwards from tray
1 to tray 5.
UD Base assembly
does not move to tray
1.
When the tray open
operation is
performed, it fails to
open. It will
automatically close all
trays after the time-out
by the
microprocessor.
During this time when
it fails, the error code
will appear.
20
Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.