Panasonic SA-AK240E Service Manual page 19

The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error
H01 Mode SW, plunger
and capstan motor
abnormal
H02 Rec INH SW
abnormal
H03 HALF SW abnormal
F01 Reel pulse abnormal
F02 TPS error
F15 RESET SW
abnormal
F26 Transmission error
between CD Servo
LSI IC and
microprocessor IC
F61 Power Amp IC output
abnormal
IHMS Cam gear
abnormality
ICSL Cam gear/gear units
abnormal
ISTK Drive rack/gear
assembly abnormal
IPLY Drive rack/gear
assembly abnormal
Automatic FL Display
REST SW: ON is not
detected within the
specified time.
When set to CD
mode, the sense
signal does not turn
"Low", a fail safe time
after system
command
transmission is sent.
Upon power on,
PCONT=HIGH,
DCDET=L after
checking LSI.
Cam gear does not
rotate to "HOME"
position.
Cam gear does not
rotate to "PLAY"
driving position and
hence does not drive
playing tray to
"STOCK" position.
The tray drive rack
does not move to
"STOCK" position.
(Tray does not move
to "STOCK" position)
The tray drive rack
does not move to
"PLAY" position. (Tray
does not move to
"PLAY" position)
19
SA-AK240E / SA-AK240EB / SA-AK240EG
Remarks
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For CD unit (For Traverse).
Press [ ] on main unit for
next error.
For CD unit (For Traverse).
Press [ ] on main unit for
next error.
For power.
Press [ ] on main unit for
next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.