TH-37PH10UK / TH-42PH10UK
6.14.2. Removal of C2-Board
1. Remove 3 screws and then remove the AC-Inlet Block.
2. Remove the Flexible Cable from the connectors (C20,
C21).
3. Disconnect the connector (C23).
4. Remove 8 screws ( ) and then remove the Flexible Cable
from the connectors (CB5, CB6, CB7, CB8).
5. Remove 4 screws ( ) and then remove C2-Board.
6.15. Removal of S1-Board
1. Remove 2 screws (H) and then remove the S1-Board Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board.
6.16. Removal of Escutcheon
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 6 screws of the Escutcheon.
4. Pull the bottom of the Escutcheon in the direction of the
arrow1 and then lift up the Escutcheon to remove in the
direction of the arrow2.
16