Introduction; Driving A Ndtransport Onpublic Roads; Towing; Operating - Craftsman 917.204130 Operator's Manual

Congratulations
Thank you for purchasing a Craftsman ride-on mower. This
machine is built for superior efficiency to rapidly mow primarily
large areas, A control panel easily accessible to the operator
and a hydrostatic transmission regulated by steering controls
both contribute to the machine's performance,
This manual is a valuable document, Read the contents
carefully before using or servicing the machine, The following
of instructions (use, service, maintenance) by all who operate
this machine is important for the safety of the operator and
others, It can also considerably increase the life span of the
machine and increase its resale value,
If you sell your machine, be sure to give the operator manual to
the new owner,
The final chapter of this operator manual provides a Service
Journal, Ensure that service and repair work are documented,
A well-kept service journal reduces service costs for the
maintenance and affects the machine's resale value, Please
contact your dealer for more information, Take the operator
manual along when the machine is taken to your dealer for
service,
General
In this operator manual, left and right, backward and forward
are used in relation to the machine's normal driving direction,
Continuous dedication to improve our products require that
specifications and design are subject to change without
notice,
Driving and Transport on Public Roads
Check applicable road traffic regulations before transporting
on public roads, If the machine is transported, you must
always use approved fastening equipment and ensure that the
machine is well anchored, DO NOT operate this machine on
public roadways,
Towing
If machine is equipped with a tow hitch, use extreme caution
when towing, Never allow children or others in or on the towed
equipment, Make wide turns to avoid jack-knifing, Travel slowly
and allow extra distance to stop,
Do not tow on sloped ground, The weight of the towed
equipment may cause loss of traction and loss of control,
Follow the manufacturer's recommendation for weight limits for
towed equipment, Do not tow near ditches, canals, and other
hazards,
Operating
This machine is constructed only for mowing grass on lawns
and even ground without obstacles such as stones, tree
stumps, etc, The machine can also be used for other tasks
when equipped with special accessories provided by the
manufacturer, Operating instructions for the accessories are
provided with delivery, All other types of uses are incorrect,
The manufacturer's directions concerning operation,
maintenance, and repairs must be carefully followed,
Lawn mowers and all power equipment, can be potentially
dangerous if used improperly, Safety requires good
judgement, careful use in accordance with these instructions
and common sense,
The machine must only be operated, maintained, and repaired
by persons familiar with the machine's special characteristics
and who are also knowledgeable about the safety instructions,
Use only approved repair parts to maintain this machine,
Accident prevention regulations, other general safety
regulations, occupational safety rules, and traffic regulations
must be followed without fail,
Unauthorized modifications to the design of the machine
may absolve the manufacturer from liability for any resulting
personal injury or property damage,
Good Service
Craftsman products are sold only in specialized retail stores
with complete service, This ensures that you as a customer
receive only the best support and service. Before the product
is delivered, the machine has, for example, been inspected
and adjusted by your retailer, See the certificate in the Service
Journal in this operator manual,
Manufacturing Number
The machine's manufacturing number can be found on the
printed plate affixed to the engine compartment.
Stated on the plate, from the top are:
o The machine's type designation (I,D,),
o The manufacturer's type number (Model),
o The machine's serial number (Serial no,)
Please have the type designation and serial number available
when ordering spare parts.
The engine's manufacturing number is stamped on one of the
valve covers,
The plate states:
o The engine's model,
o The engine's type,
o Code
Please have these available when ordering spare parts.
The wheel motors and hydrostatic pumps have a barcode
decal affixed at the rear,