Emergency Switch Guard - Pro-face GP2301H-LG41-24V Installation Manual

8

Emergency Switch Guard

Emergency Switch Guard
This guard is used to prevent the accidental pressing of the Emergency Stop Switch
when the GP2000H unit is placed face down on a table, or is accidentally dropped.
This unit is factory equipped with two (2) Emergency Switch Guard Hole Covers
(Seals).
For guard attachment details, refer to
GP2000H Series User Manual
9 Wiring
• To avoid an electric shock, prior to connecting the GP's power cord
terminals to the power terminal block, confirm that the GP's power
supply is completely turned OFF, via a breaker, or similar unit.
• The GP2000H Series units are designed to use only DC24V input.
Any other power level can damage both the GP and the power
supply.
• Since there is no power switch on the GP unit, be sure to attach a
breaker-type switch to its power cord.
When connecting the GP2000H Series units to a Serial I/F, DC24V I/F, or External
I/F, be sure to use the Digital Electronics Corporation's GP2000H Series option
cables.
Digital's option cables are as follows.
Cable Name
RS-232C DSUB Connector 3m Cable
RS-232C DSUB Connector 10m Cable GP2000H-D232-10M
RS-232C 3m Cable
RS-232C 10m Cable
RS-422 DSUB Connector 3m Cable
RS-422 DSUB Connector 10m Cable
RS-422 3m Cable
RS-422 10m Cable
Emergency Switch Guard
WARNINGS
Model Number
GP2000H-D232-3M
GP2000H-C232-3M
GP2000H-C232-10M
GP2000H-D422-3M
GP2000H-D422-10M
GP2000H-C422-3M
GP2000H-C422-10M