Options - Kenwood TH-D72A Instruction Manual

The following options are available for use with this transceiver:
• PB-45L Li-ion battery pack
• BT-15 Battery case
• KSC-32 Rapid charger
• SMC-32 Speaker microphone
• SMC-33 Speaker microphone
• SMC-34 Speaker microphone
• HMC-3(G) Headset
Note: Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.
MeMOry cONTrOl PrOgraM McP-4a
The following functions can be set only by using the MCP-4A software:
• SQC active condition
• Input/output level (DATA terminal)
• 10 MHz mode selection
• Power on password value
Using the MCP-4A software, you can:
• View memory channel groups
• Name memory groups
• Save/load settings
• Read exported TravelPlus for Repeaters
(There are some version restrictions; refer to the help text of the MCP-4A.)
• Print/export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-4A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Note: This URL may change without notice.
Using the McP-4a Software
1 Follow the directions of the installer to install the software.
2 Set up the PC COM port and baud rate.
3 The transceiver data is read from the MCP-4A software.
4 Select your desired settings, then write the data to the transceiver.
36

OPTIONS

• KHS-21
• KHS-29F
• EMC-7
• HS-9(G)
• PG-3J
• PG-2W
• PS-60
™
files issued from the ARRL
Headset
Headset
Clip microphone
Earphone
Cigarette lighter cord
DC cable
DC Power Supply
™